I’ve decided to add a DSP to the AUX input of my cars radio. <\/p>\n\n\n\n
I have a 2012 Nissan NV200 with a Bosch-made Nissan Connect radio. That radio has a combined 8-pin plug for USB and Aux. <\/p>\n\n\n\n
On the internet<\/a> you can find various adapters from 8pin to RCA+USB, however those all have the wrong gender. They’re made to connect a radio with generic Inputs to a Nissan wiring-harness. However, I needed a adapter to connect an Nissan\/Bosch radio to a generic wiring-harness.<\/p>\n\n\n\n\n\n\n\n After searching for days, I decided to build my own adapter. The connector used is called Hirose<\/a> GT17<\/a>. You can get it at Mouser. The connector has to be ordered in parts, here’s a list:<\/p>\n\n\n\n I recommend ordering spares.<\/p>\n\n\n\n To build the Adapter, I used a old insert-cable from Thomann<\/a> and a USB-extension cable I had laying around.<\/p>\n\n\n\n The pinout can be deduced from the Hirose to 3.5+USB adapter found between the seats.<\/p>\n\n\n\n Because I had broken said adapter a while back, I decided to not use the built-in USB plug. However, you of course could just build a T-shaped adapter. See the GT17<\/a> datasheet for the parts you’d need.<\/p>\n","protected":false},"excerpt":{"rendered":" I’ve decided to add a DSP to the AUX input of my cars radio. I have a 2012 Nissan NV200 with a Bosch-made Nissan Connect radio. That radio has a combined 8-pin plug for USB and Aux. On the internet you can find various adapters from 8pin to RCA+USB, however those all have the wrong … Continue reading Building a AUX and USB Adapter for Nissan Connect<\/span>